Facial balance before added volume
Dermal filler treatment at Dr. Orhan Demirer’s dermatology practice in Alsancak is planned by assessing facial proportions, bone and soft-tissue support, skin quality, previous fillers, vascular anatomy and the patient’s own goals.
- Whole-face assessment rather than a standard template
- Individual product, layer and amount selection
- Measured planning designed to preserve facial identity
- English communication for international patients
Dermal fillers in Izmir: support, contour and proportion
Dermal fillers are injectable medical device implants used to add support or volume in selected tissues. Depending on the material and its product-specific indication, a filler may be considered for lips, cheeks, chin, jawline, nasolabial folds, the back of the hands or other selected areas. Regulatory approvals vary by product and country.
Filler cannot correct every feature that appears tired, hollow or asymmetrical. Pigmentation, skin laxity, fluid retention, muscle activity, scar tissue and bone structure can create concerns that resemble volume loss but require a different approach. Adding product to the wrong problem can make the face look heavier without addressing the cause.
Dr. Orhan Demirer evaluates the face from the front, profile and oblique views, both at rest and during expression. The objective is to decide where support may be useful, where volume should be avoided and whether another treatment—or no procedure—is more appropriate.
Important: “Dermal filler” is not one universal product. Hyaluronic acid, calcium hydroxylapatite and other materials behave differently, have different approved uses and cannot be exchanged or reversed in the same way.
Volume loss
Age-related or constitutional tissue deficiency may benefit from carefully selected support when anatomy and skin quality are suitable.
Facial proportion
Chin, cheek or jawline support may influence profile balance, but more projection is not automatically more harmonious.
Skin or fluid concerns
Pigmentation, oedema, laxity and texture may not improve with filler and can occasionally look worse if volume is added.
Why medical and anatomical planning matters
Filler injection is a medical procedure, not simply the placement of cosmetic gel. Product choice, depth, vascular anatomy, existing filler and complication recognition are all part of the decision.
Vascular anatomy
Facial vessels vary between individuals. Every treatment area has a specific risk profile that must be considered before injection.
Product selection
A product suitable for structural support may be inappropriate for a thin, mobile or oedema-prone area.
Tissue plane
The same material can behave differently depending on where and how it is placed within the facial tissues.
Previous filler
Unknown, migrated or repeatedly layered product can change anatomy and make assessment or correction more complex.
Proportion and movement
Lips, chin, cheeks and jawline are evaluated in relation to one another and to the patient’s natural facial movement.
Complication planning
Early recognition of unusual pain, colour change or visual symptoms and a clear response pathway are essential.
Dermal filler treatment areas in Izmir
Each area has different anatomy, objectives and limitations. Some locations may be higher risk or off-label depending on the specific product and jurisdiction.
Lip Fillers
Shape, border, hydration, projection and upper-to-lower lip proportion are assessed without applying one standard lip template.
Chin Fillers
May support projection or profile balance in selected patients while avoiding an excessively long or pointed chin.
Jawline Fillers
Can support selected contour deficiencies; it does not slim every face or correct all causes of lower-face heaviness.
Cheek Fillers
May restore selected mid-face support, but product placement should respect natural cheek anatomy and facial width.
Under-Eye Filler
Requires strict selection because bags, oedema tendency, pigmentation or skin laxity may not improve with filler.
Nose Filler
A high-risk area that may camouflage selected profile irregularities but adds volume and is not a substitute for every surgical need.
Nasolabial Fillers
Smile-line depth may reflect mid-face support and movement; direct filling is not automatically the only approach.
Marionette Line Fillers
Lower-face structure, chin support and tissue descent are considered before adding volume around the mouth.
Balanced, not overfilled
A natural-looking result does not simply mean using the smallest possible amount. It means selecting the right area, product, tissue plane and quantity for the patient’s anatomy—and recognising when no filler should be added.
Treating one feature in isolation can disturb another. Lip projection influences profile balance; chin support affects the apparent relationship between the lips and lower face; cheek width and jawline definition change the overall silhouette. At the same time, “full-face harmonisation” should not become a reason to inject every area.
Existing filler accumulation, product migration or repeated correction attempts may produce heaviness that cannot be solved by adding more. In these cases, observation, imaging when available, staged correction or filler reversal assessment may be more appropriate.
The desired direction is discussed openly, but exact symmetry, a celebrity feature or a guaranteed volume cannot be promised.
Types of fillers used for different goals
Material choice should follow the clinical objective. Product-specific instructions, approved areas and patient information must be reviewed for the exact preparation being considered.
Hyaluronic acid fillers
Temporary gels used for selected volume, contour or line correction. Texture, cohesivity and lifting capacity differ between products. Some HA filler may be reduced with hyaluronidase when medically appropriate, but correction is not risk-free or perfectly predictable.
Biostimulatory fillers
Materials such as calcium hydroxylapatite-based products may provide structural support and stimulate collagen-related tissue change. They do not behave like HA gel and cannot be dissolved with hyaluronidase.
Hybrid filler
hybrid HA + CaHA filler combines hyaluronic acid and calcium hydroxylapatite components. It has product-specific indications and is not a universal choice for lips, under-eyes or every facial area.
Hand rejuvenation fillers
Selected products may restore support on the back of the hands. Skin quality, tendons, vessels and the product’s approved indication must be considered.
Product choice by tissue
Soft mobile tissue, thin periorbital skin and structural chin support do not require the same rheology or placement strategy.
Unknown previous filler
When the material, date or amount is unknown, adding another product without careful assessment may increase uncertainty and complication risk.
How dermal filler treatment is planned
The plan should be clear before a syringe is opened. The number of millilitres is a result of assessment—not the starting point.
Medical history
Allergies, medicines, bleeding tendency, infections, dental plans, previous fillers and past reactions are reviewed.
Facial analysis
Proportions, asymmetry, support, skin quality, expression and signs of previous product are assessed.
Product and placement
The physician selects the material, amount, tissue plane and method according to the agreed objective and risk profile.
Aftercare and review
Expected swelling, warning signs, individual aftercare and the appropriate time for result assessment are explained.
What first-time patients should know
The first question should not be “How many millilitres do I need?” The starting point is to identify whether the concern is truly caused by volume deficiency and whether filler is the most proportionate solution.
Swelling can make the immediate result look larger or less symmetrical than the settled result, particularly in the lips. Structural areas such as the chin or cheek may show an immediate contour change, but tissue response still needs time to settle.
A staged plan can sometimes be more appropriate than attempting a large transformation in one session. Conservative planning does not mean ignoring the treatment goal; it means allowing anatomy, tissue response and facial balance to guide the pace.
- Bring the names, dates and areas of previous fillers when known.
- Discuss dental procedures, recent infections and active skin problems.
- Do not choose a product or millilitre amount from social media alone.
- Expect temporary swelling, tenderness or bruising.
- Know the urgent vascular warning signs before leaving.
When does filler settle and how long can it last?
Most fillers create an immediate or near-immediate volume effect, but this is mixed with early swelling. Collagen-stimulating effects develop on a different timeline.
Contour may be visible, but swelling, redness, tenderness and small asymmetries can temporarily affect appearance.
Early reactions usually reduce over time. The settling period differs by area, material, amount and individual tissue response.
Longevity depends on filler material and injection area. The AAD gives broad estimates of approximately 4–12 months for HA gel and 6–12 months for calcium hydroxylapatite, but individual products may differ.
Longer duration is not the only measure of a successful result. Excessive product or repeated topping-up before reassessment may create accumulation, migration or disproportion.
Who may be suitable for dermal fillers?
Suitability depends on the concern, anatomy, product, medical history and the person’s understanding of benefits, limits and risks.
Assessment may be relevant for
- Selected age-related or constitutional volume deficiency
- Lip, chin, cheek or jawline proportion concerns
- Appropriate nasolabial or marionette-line support needs
- Selected under-eye hollowing without dominant oedema or bags
- Adults seeking a measured, temporary and realistic change
- Patients willing to discuss alternatives and staged treatment
Treatment may be unsuitable or postponed
- Active skin inflammation, infection, cysts, rashes or hives near the area
- Relevant severe allergy, anaphylaxis history or product-component allergy
- Uncontrolled bleeding concerns or medicines requiring medical review
- Recent illness, infection or dental procedure relevant to treatment timing
- Unknown or excessive previous filler requiring further assessment
- Pregnancy or breastfeeding when elective aesthetic treatment is considered
Do not stop prescribed anticoagulants or other medicines on your own. Medication decisions must be made with the prescribing physician and the treating doctor.
Side effects, vascular occlusion and urgent warning signs
Dermal fillers can cause temporary, delayed or permanent complications. Risk varies by material, injection site, technique, patient factors and previous procedures.
Common or usually temporary effects
Swelling, bruising, redness, pain, tenderness, itching and temporary unevenness may occur. These often improve over days to weeks, but the expected course differs by area and product.
Less common or delayed problems
Infection, inflammatory reactions, nodules or granulomas, persistent firmness, migration, discolouration, open wounds, allergic reactions and delayed swelling can occur weeks, months or even years later.
The most concerning acute risk is unintended injection into—or compression of—a blood vessel. Reduced blood flow can cause tissue injury or necrosis. Rare reported complications include visual impairment or blindness and stroke; these outcomes may be permanent.
Do not “wait and see” if unusual pain, blanching/colour change, visual symptoms or stroke-like signs occur during or after filler treatment. Seek immediate medical evaluation and contact the treating physician without delay.
Product authenticity, traceability, knowledge of anatomy, area-specific consent and a current complication-response plan are essential. Needle-free filler pens and self-injection should not be used.
Medical information cross-checked against the FDA dermal filler safety guidance, the FDA consumer recommendations and the American Academy of Dermatology filler FAQ. These references do not replace the product information and medical guidance applicable in Türkiye.
Filler aftercare and early swelling
Aftercare depends on the material and treatment area. The physician’s individual instructions take priority over generic internet advice.
Mild swelling, tenderness, redness or bruising can be expected, especially in the lips. Early swelling can temporarily exaggerate volume or asymmetry. Do not make a final aesthetic judgement immediately after treatment.
Massage is not appropriate for every filler. Do not press, manipulate or attempt to reshape the area unless specifically instructed. Ask about exercise, heat exposure, skin treatments, dental work and other procedures according to the product and area treated.
Contact the practice promptly if symptoms worsen unexpectedly. Urgent red flags such as unusual pain, blanching, grey-blue colour or visual change require immediate assessment.
- Follow the area- and product-specific instructions.
- Do not massage unless the physician specifically advises it.
- Allow swelling to settle before judging volume or symmetry.
- Report delayed nodules, persistent redness or recurrent swelling.
- Seek immediate care for vascular or visual warning signs.
Can dermal fillers be dissolved?
Some hyaluronic acid fillers may be reduced or dissolved with the enzyme hyaluronidase in selected aesthetic corrections or complication-management situations. This does not mean that every filler problem can be erased instantly or that reversal always returns the tissues to an exact previous appearance.
Hyaluronidase does not dissolve calcium hydroxylapatite, poly-L-lactic acid, permanent fillers or every unknown/hybrid material in the same way. Biostimulatory and hybrid products require a different assessment. Unknown previous filler can make planning especially difficult.
Filler reversal is itself a medical intervention with limitations and potential adverse reactions. The material, location, amount, timing and reason for correction must be reviewed. Suspected vascular compromise is an emergency and should not be managed as a routine cosmetic dissolution appointment.
Learn how HA filler correction differs from managing biostimulatory, hybrid, permanent or unknown products.
Dermal filler prices in Izmir
Filler pricing depends on the area, treatment goal, product category, amount required and complexity of the plan. Lip filler, under-eye treatment, chin projection, jawline support, hand rejuvenation and a biostimulatory or hybrid product should not be compared as if they were the same procedure.
The number of millilitres is only one part of the plan. Product choice, tissue plane, existing filler, staged treatment and whether an area should be left untreated can be equally important. A lower headline price does not explain product authenticity, indication, complication planning or follow-up.
The appropriate treatment scope and fee can be discussed after the anatomy and objective are understood. It is not medically sound to promise a fixed amount for every face from a photograph alone.
Learn which clinical and product factors can change treatment scope and why individual areas require different planning.
Fillers, Botox or skin rejuvenation?
These treatments address different components. The appropriate option depends on whether the main concern is volume/support, muscle activity or skin quality.
Dermal fillers
Add support or volume in selected tissues and may influence contour or proportion. They do not relax facial muscles.
Botox
Temporarily reduces selected muscle activity and is mainly relevant to dynamic facial lines or specific medical indications.
Skin rejuvenation
Laser, energy-based or injectable skin-quality treatments may address texture, pigmentation, redness or collagen remodelling.
A combined plan may sometimes be appropriate, but the safety of specific combinations depends on the products, sequence and patient. More procedures are not automatically better.
Dermal fillers in Izmir for international patients
Dr. Orhan Demirer’s dermatology practice is located in Alsancak, Konak, a central area of Izmir. Consultation, consent and aftercare information can be discussed in English.
Patients travelling from abroad should share their preferred dates, the area they would like assessed and all known details of previous fillers, including product, amount, area and date. Photographs may help with scheduling but cannot determine product choice, millilitres or suitability.
Consultation and treatment may sometimes occur during the same visit when appropriate, but this cannot be guaranteed. Swelling can continue after departure, and serious warning signs require immediate care wherever the patient is located. Discuss travel timing, access to follow-up and any planned dental or medical procedures before booking a very short trip.
Share dates, main concern and previous filler information.
Anatomy, existing product, medical history and risk are assessed in person.
Follow individual guidance and know which symptoms require urgent care.
Frequently asked questions about dermal fillers in Izmir
What are dermal fillers used for?
Depending on the product and its approved indication, fillers may add selected volume or support to lips, cheeks, chin, jawline, facial folds or the back of the hands. They do not treat every cause of ageing, asymmetry or tired appearance.
Can dermal fillers look natural?
A natural-looking result depends on appropriate indication, product, placement and amount. The aim is to support individual anatomy rather than apply a standard shape. Results vary and cannot be guaranteed.
Which filler areas are commonly assessed?
Common consultations include lips, chin, jawline, cheeks, nasolabial folds and marionette lines. Under-eye and nose filler require especially careful selection because of anatomy, oedema and vascular risk.
How long do dermal fillers last?
Duration depends on material, product, injection area, tissue characteristics and individual response. The AAD gives broad estimates of approximately 4–12 months for HA gel and 6–12 months for calcium hydroxylapatite, but specific products may differ.
When will I see the final filler result?
Many fillers create an immediate or near-immediate contour change, but swelling can distort the early appearance. Settling time varies by area, material and individual response; the first-day result should not be treated as final.
Is filler treatment painful and is there downtime?
Discomfort varies by area and technique. Local anaesthetic may be used or included in some products. Swelling, tenderness, redness and bruising can occur. Many patients resume routine activities quickly, but visible swelling may last longer in areas such as the lips.
Is swelling after filler normal?
Mild swelling can be expected, but severe or increasing pain, blanching, grey-blue colour, visual change, stroke-like symptoms or rapidly worsening swelling are not routine and require immediate medical assessment.
What are the most serious dermal filler risks?
Unintended injection into or compression of a blood vessel can reduce blood flow and cause tissue necrosis. Rare reported complications include visual impairment or blindness and stroke; these may be permanent.
Can dermal fillers be dissolved?
Some hyaluronic acid fillers may be reduced with hyaluronidase in selected situations. Other materials—including calcium hydroxylapatite, biostimulatory, permanent or unknown fillers—cannot be dissolved in the same way. Reversal has its own risks and limitations.
Is nose filler suitable for everyone?
No. Nose filler adds volume and cannot correct every structural problem. It is a high-risk vascular area and may be off-label depending on the product and jurisdiction. Surgical assessment may be more appropriate for some patients.
Is under-eye filler suitable for everyone?
No. Prominent bags, fluid retention, very thin or lax skin, pigmentation and certain anatomical patterns may not improve with filler and can sometimes look worse. Careful patient selection is essential.
What is the difference between filler and Botox?
Fillers add support or volume in selected tissues. Botox temporarily reduces selected muscle activity and is mainly used for dynamic lines. Some patients may need one, both or neither.
Can dermal fillers be performed during pregnancy or breastfeeding?
Safety data are limited. Dr. Orhan Demirer generally postpones elective aesthetic filler treatment during pregnancy and breastfeeding. Individual medical circumstances should be discussed with the relevant physician.
How much do dermal fillers cost in Izmir?
The fee depends on the treatment area, product category, amount, existing filler and total complexity. Lip, under-eye, chin, jawline, hand and biostimulatory treatments should not be compared as the same procedure.
Can international patients book an English filler consultation?
Yes. English communication is available. Share your preferred dates and details of any previous filler when known. Final suitability, product and amount require an in-person assessment.
Arrange a personal filler assessment in Izmir
The first step is not choosing a syringe amount. It is deciding whether filler is appropriate, which tissue truly needs support and which areas should be left untreated.
Filler planning considers facial proportions, tissue support and safety rather than treating one area in isolation. For the wider clinical approach, visit the dermatologist in Izmir homepage.